Original Roland GX-24 / GS-24 / GS2-24 Linear Guide Rail SRS9 680 mm – 1000012576
Linear guide rail and bearing block 1000012576 (L-BEARING,SRS9XGMUUC1+680LM) for the Roland CAMM-1 GX-24, GS-24 and GS2-24. Replaces a worn guide that causes carriage play, noise and wobbly lines.
- Price: 444 – US dollar
Roland part 1000012576 (L-BEARING,SRS9XGMUUC1+680LM) is the linear guide used for the cutting carriage of the CAMM-1 GX-24, GS-24 and GS2-24 desktop vinyl cutters. It consists of a miniature SRS9 type guide rail, 680 mm long according to the part name, with its bearing block. This is a genuine, original Roland part – not a copy or compatible replacement.
The linear guide keeps the carriage running perfectly straight and free of play. When the balls or the rail surface wear, or dirt and old grease build up, the carriage begins to move roughly. You may notice a grinding or rumbling sound during fast moves, wobbly edges on curves, tiny steps in straight lines, uneven cutting depth and, in bad cases, motor errors caused by extra friction. Replacing the guide restores the precision and quiet running these cutters are known for.
Key Features
- Genuine original Roland part
- Roland part number 1000012576
- SRS9 type miniature linear guide, 680 mm rail
- Fits GX-24, GS-24 and GS2-24
- Removes carriage play for clean, accurate cuts
Compatible models: Roland CAMM-1 GX-24, GS-24 and GS2-24.
Please check the part number on your existing part, or contact us with your machine model and serial number if you are not sure about compatibility.
| Item | Specification |
|---|---|
| Brand | Roland DG |
| Authenticity | Genuine original Roland part |
| Part Number | 1000012576 |
| Part Name | L-BEARING,SRS9XGMUUC1+680LM |
| Rail Length | 680 mm (per part name) |
| Compatible Models | GX-24, GS-24, GS2-24 |
| Condition | New |