Original Mimaki JV150 / JV300 / CJV150 / CJV300 / TS300P Ink Pump – M014070

The Mimaki M014070 is the ink pump used in the maintenance system of a wide range of Mimaki roll printers: the JV150, JV300, CJV150 and CJV300 series (including BS versions), the JV400 LX and SUV models, and the TS300P-1800, TS500-1800 and TX500-1800 textile printers. Connected to the capping station, it creates the suction that pulls ink through the nozzles during head cleaning and carries the waste ink away from the caps to the waste ink tank. M014070 is the current code; it replaces the older code M011571. This is a genuine, original Mimaki part – not a copy or compatible replacement.

When the pump wears out, or its tubes and rollers are clogged with dried ink, suction becomes weak or stops. Typical symptoms are cleanings that do not recover missing nozzles, ink left standing in the caps after cleaning, ink not reaching the waste tank, pump noise without suction, and nozzles drying out while the printer is idle. Replacing the pump restores normal cleaning performance and protects the print heads.

Key features

• Genuine Mimaki ink pump, part number M014070 (replaces old code M011571)
• Fits JV150, JV300, CJV150, CJV300, JV400, TS300P, TS500 and TX500 models
• Provides suction for head cleaning and capping
• Moves waste ink from the caps to the waste tank
• Direct replacement for the original pump

Compatible with: Mimaki CJV150-75/107/130/160 (incl. BS), CJV300-130/160 (incl. BS), JV150-130/160 (incl. BS), JV300-130/160 (incl. BS), JV400-130LX, JV400-130SUV, JV400-160LX, JV400-160SUV, TS300P-1800, TS500-1800, TX500-1800B, TX500-1800DS

Please check the part number on your existing part, or contact us with your machine model and serial number if you are not sure about compatibility.