Original Roland GR-640 / GR-540 / VS-640i Media Cut-Off Blade OLFA XB10

The OLFA XB10 (BLADE OLFA AUTO CUTTER XB10) is the replacement blade for the media cut-off knife used on a long list of Roland machines. After a job is finished, this blade slides across the media to separate the output from the roll, so its sharpness decides whether you get a clean edge or a torn one. This is a genuine, original Roland part – not a copy or compatible replacement.

A dull cut-off blade leaves ragged or uneven edges, fails to cut through thicker vinyl, banner or laminated media, drags the material sideways or leaves the job hanging by a strip. Replacing the blade is quick and keeps unattended production running smoothly.

Key features

• Genuine original Roland part
• OLFA XB10 cut-off blade specified by Roland
• Separates finished jobs from the roll
• Clean, straight edge on vinyl and printed media
• Fits cutters and printers across many series

Compatible models: LEC-300, LEC-300A, LEC-330, LEC-540, LEJ-640, XJ-540, XJ-640, XJ-740, XC-540, XC-540W, XC-540MT, XR-640, SC-500, SC-540, SC-545, SC-545EX, SJ-500, SJ-600, SJ-540, SJ-740, SJ-545, SJ-645, SJ-745, SJ-545EX, SJ-645EX, SJ-745EX, VS-640i, VS-540i, VS-300i, VS-640, VS-540, VS-420, VS-300, VP-540i, VP-300i, VP-540, VP-300, SP-540i, SP-300i, SP-300, SP-300S, SP-300W, SP-300V, SP-300VS, SP-540V, SP-540VS, FJ-40, FJ-50, FJ-42, FJ-52, FJ-540, CJ-400, CJ-500, CJ-540, CM-300, CM-400, CM-500, CX-300, CX-400, CX-500, GX-400, GX-500, PC-600, RS-640S, RS-540S, RE-640, GR-640, GR-540 and GR-420.

Please check the part number on your existing part, or contact us with your machine model and serial number if you are not sure about compatibility.