Mimaki · Ricoh GEN5 · UV printhead
Mimaki JFX200-2513 GEN5 Printhead M022625
Original Mimaki GEN5 (Ricoh MH5420) printhead M022625 for the JFX200-2513 UV flatbed – 1280 nozzles, 7–35 pl drops and a built-in heater.
- 100% original & brand new
- Made in Japan
- Worldwide shipping by DHL / FedEx
Wholesale price · USD per piece
1 – 4 pcs
$2,300
5 – 9 pcs
$2,270
10+ pcs
$2,270
- 1280nozzles
- 7–35 pldroplet size
- 60 kHzmax frequency
- UVink type
Mimaki JFX200-2513 Printhead M022625 Overview
This printhead is a genuine Mimaki part for the JFX200-2513 UV flatbed printer. It’s the head maintenance assembly that comes with a built-in heater. The actual head is a GEN5 model (the Ricoh MH5420), and it uses piezo drop-on-demand technology. It’s made for UV-curable inks, so you get accurate ink placement and consistent colors even when you’re running at high speed.
The head works with both 2-color and 4-color setups, gives you 8 levels of grayscale, and reaches up to 600 npi nozzle density — so it handles industrial print jobs that need both good quality and good speed. It’s 100% original and made in Japan, so you don’t have to worry about fit or reliability.
One thing worth keeping in mind is the part number history. M022625 replaced the two older versions, M017004 and M015028. After that, a newer part, M026887, came out and replaced M022625, M017004, and M015028. So the full upgrade chain looks like this: M015028 → M017004 → M022625 → M026887, with M026887 being the latest one. This makes it easy to tell how new or old a part is when you’re buying.
Install tip: When you put in a head with the new M022625 code, you may need to update the printer’s firmware for it to run properly — v2.60 or later for the JFX200-2513, and v2.50 or later for the JFX200-2531.
Built-in heater
Head maintenance assembly with heater and thermistor.
1280 nozzles
4 rows × 320, up to 600 npi and 8 grey levels.
Firmware check
JFX200-2513 needs FW 2.60 or later, JFX200-2531 FW 2.50 or later.
Part number history
M015028 → M017004 → M022625 → M026887.
Specifications
| Item | Specification |
|---|---|
| Dimensions | 89 x 25 x 69 mm (excluding cables) |
| Head materials | SST, Nickel alloy, Epoxy adhesive |
| Nozzle plate surface | Coated SST |
| Number of nozzles | 4 x 320 nozzles |
| Nozzle spacing | 0.1693 mm |
| Nozzle density | Up to 600 npi |
| Piezo type | D33 Stacked PZT |
| Temperature control | Integrated heater & thermistor |
| Operating temperature range | Up to 80°C |
| Native drop volume | 7 pl |
| Drop volume range | 7 – 35 pl |
| Drop velocity | 7 m/s |
| Jetting frequency | Up to 60 kHz |
| Life span | 100 billion actuations per nozzle |
| Country of origin | Japan |
Not sure this is the right head for your printer?
Send Ewan your printer model on WhatsApp – he’ll confirm compatibility and reply with a quote, usually within a few hours.
